CME-55 Truck Mounted Drill Specifications
Rubber Tire ATV Mounted Drills | Truck Mounted Drills | Track Carrier Mounted Drills | Trailer Mounted Drills | Skid Mounted Drills
55 Features | 55 Specifications | 55 Optional Equipment
Engine
- Cummins QSF 3.8L (229 cubic inch) 120 horsepower (89 kilowatt) 4-cylinder turbocharged diesel engine with electronic throttle, engine protection shut down, and cold weather starting aid meets U.S. EPA tier-4 final emissions standards.
Rotary drive
- Clutch, heavy duty
- 14 inch (35.6 cm)
- Transmission
- 5 speed forward, 1 speed reverse
- Standard Rotary Box
- 7,963 foot pounds (10,796 Nm) max spindle torque
- 868 rpm max spindle speed
- High Torque Rotary Box
- 10,410 foot pounds (14,114 Nm) max spindle torque
- 664 rpm max spindle speed
- Hollow spindle
- Standard: 2-3/4 inch I.D. (7 cm)
- Optional: 3-3/4 inch I.D. (9.5 cm)
Hydraulic feed system
- Retract force
- 28,275 pounds (12,826 kg)
- Pulldown force
- 18,650 pounds (8,460 kg)
- Retract rate
- 35 feet (10.6 m) per minute
- Rapid Retract rate
- 90 feet (27.4 m) per minute
- Feed Rate
- 55 feet (16.2 m) per minute
- Stroke
- 72 inch (183 cm)
55 Features | 55 Specifications | 55 Optional Equipment
Performance ratings are based on engineering specifications, calculations and accepted industry standards.
Capacities may vary according to drilling conditions. CME reserves the right to amend these specifications at any time, without notice.
