Rubber Tire ATV Mounted Drills  |  Truck Mounted Drills  |  Track Carrier Mounted Drills  |  Trailer Mounted Drills  |  Skid Mounted Drills

CME-45C Truck Mounted Drill Features

45C Features  |  45C Specifications  |  45C Optional Equipment

CME-45C Truck Mounted DrillNo CDL required
The CME-45C is commonly mounted on 4x2 and 4x4 trucks rated at or under 26,000 pound GVWR.

Hydraulic feed and retract system provides 19,600 lbs. (8,891 kg) of retract force and 13,650 lbs. (6,192 kg) of down pressure
The twin 68 inch (173 cm) stroke hydraulic feed cylinders are mounted in line with the rotary drive coupling applying direct force to the drilling tools.

Rugged mechanical rotary drive with up to 4,858 foot pounds (6,587 Nm) of torque
Several torque and rotation speed combinations are available. The four speed transmission is connected to the drill engine through a heavy-duty clutch. With four forward gears and one reverse, there’s a rotation speed and torque combination available for just about any situation. The mechanical rotary drive also gives you a good feel for changes in soil and drilling conditions down the hole. It allows you to sense the need to adjust feed pressure and rotational torque.

Control logic — the key to operator productivity
All drilling and set-up controls are logically arranged on a control panel located at the drillers station. A lock-out position for the clutch lever helps prevent accidental engagement. And since the transmission does not travel vertically with the spindle, you won’t find yourself unable to change gears when you’re at the top of the feed stroke.

CME-45C Truck Mounted Drill Control PanelPatented spindle brake stops rotation in an instant
Our emergency spindle brake can stop rotation in less than a revolution. This system is activated by two conveniently located push button switches, as well as by strategically located multi-directional wobble switches. All switches are located on the drill and are not affected if removed from the carrier.

Dependable Cummins diesel power
The CME-45C is powered by a Cummins QSF 2.8, 171 cubic inch, 65 Horsepower Tier-4 final diesel engine.

For your specific applications
Truck, trailer, skid, ATV, tracked carrier, helicopter-portable… The CME-45C can be configured to fit your specific drilling applications.

† Patented by Central Mine Equipment Company

Performance ratings are based on engineering specifications, calculations and accepted industry standards.
Capacities may vary according to drilling conditions. CME reserves the right to amend these specifications at any time, without notice.