CME-55 Track Carrier Auger Drill Specifications

CME-55 on CME-300 Tracked Carrier

Features | Specifications | Optional Equipment

Engine

  • Cummins QSB 4.5L [275 cubic inch] 110 horsepower [82 kilowatt] 4 cylinder turbocharged diesel engine. U.S. EPA Tier 3 emissions certified.

Carrier

  • Track Width
    • 17.7 in [45 cm]
  • Avg. ground bearing pressure
    • 4.5 psi [.309 kg/cm2]
  • Suspension
    • Triple walking beams
  • Turning Radius
    • In place
  • Drive
    • Hydraulic motor/planetary wheel drives
  • Optional 2 Speed drive
    • Low Speed: 0-1mph
    • High Speed: 0-2mph
  • Steering
    • Remote radio controlled guidance
  • Hydraulic front winch
    • 12,000 lbs [5,443 kg]
  • Auger and rod racks
    • Standard
  • Tool boxes
    • Standard

Gradeability

  • Straight ahead climb
    • 50% grade
  • Side-hill traverse
    • 36% grade

Rotary drive

  • Clutch, heavy duty
    • 13 inch [33 cm]
  • Transmission
    • 5 speed forward, 1 speed reverse
  • Standard Rotary Box
    • 7,700 foot pounds [10,440 Nm] max
    • 800 rpm max
  • High Torque Rotary Box (optional)
    • 9,400 foot pounds [12,744 Nm] max
    • 665 rpm max

Hydraulic feed system

  • Retract force
    • 28,275 pounds [12,826 kg]
  • Pulldown force
    • 18,650 pounds [8,460 kg]
  • Retract rate (max)
    • 35 feet [10.6 m] per minute
  • Rapid Retract rate (max)
    • 90 feet [27.4 m] per minute
  • Feed Rate (max)
    • 55 feet [16.7 m] per minute
  • Stroke
    • 72 inch [183 cm]

Leveling system

Four hydraulic jacks, inverted design with chrome-plated piston rods enclosed at all times.

  • Stroke
    • 36 inch [91.4 cm]

CME-55 300 Carrier Line Drawing