CME-95 Truck Mounted Drill Specifications
Rubber Tire ATV Mounted Drills | Truck Mounted Drills | Track Carrier Mounted Drills | Trailer Mounted Drills | Skid Mounted Drills
95 Features | 95 Specifications | 95 Optional Equipment
Engine
- Cummins QSB 6.7L (409 cubic inch) 250 horsepower (186 kilowatt) 6-cylinder turbocharged diesel engine. U.S. EPA Tier 3 emissions certified.
Rotary drive
- Power shift transmission
- 4 speed forward, 4 speed reverse
- Rotary Drive (standard)
- 30,200 foot pounds max (40,945 Nm) spindle torque
- up to 544 rpm max spindle speed
- Rotary Drive (optional)
- 36,100 foot pounds max (48,945 Nm) spindle torque
- up to 454 rpm max spindle speed
- Low Speed Drive
- 9,400 foot pounds max (12,745 Nm)
- up to 100 rpm max
Hydraulic feed system
- Retract force
- 62,830 pounds (28,500 kg)
- Pulldown force
- 33,135 pounds (15,030 kg)
- Retract rate (max)
- 45 feet (14 m) per minute
- Rapid Retract rate (max)
- 96 feet (29 m) per minute
- Feed Rate (max)
- 86 feet (26 m) per minute
- Stroke
- 75 inch (190.5 cm)
Drill platform
- For tandem axle 6x4 or 6x6 trucks
- Underbody tool boxes 71 inch (180 cm) long, both sides
- Rod rack on deck, helper side
- Heavy-duty folding driller step
- Hydraulic leveling jacks, 36 inch stroke, two rear, one front
Drill mast
- 33 feet (10 m) from slide base to crown sheaves
Main hoist
- Pullmaster 12,000 pound (5,443 kg) capacity planetary drive hoist
95 Features | 95 Specifications | 95 Optional Equipment
Performance ratings are based on engineering specifications, calculations and accepted industry standards.
Capacities may vary according to drilling conditions. CME reserves the right to amend these specifications at any time, without notice.
