CME-800X All-Terrain Track Carrier
Specifications
800X Features | 800X Specifications
Engine
- Cummins QSB 6.7L (409 cubic inch) 195 horsepower (145 kilowatt) 6 cylinder turbocharged diesel engine. U.S. EPA Tier 4 final emissions certified diesel engine. Electronic thottle control, cold weather starting aid, and engine protection shutdown systems.
Transmission
- Each track is independently driven via a hydrostatic transmission with high pressure variable displacement pump, two speed fixed displacement piston motor and joystick steering operation.
Suspension system
- Twin walking beams with 28 inch (71 cm) diameter smooth tread solid rubber tires mounted on oil filled hubs with dual cone seals.
Tracks
- 33 inch (84 cm) wide, 4-ply rubber belt with steel grouser bars.
Brakes
- Service brake controlled via closed circuit hydrostatic transmission levers. External spring applied hydraulic release parking brake.
Steering
- 100% hydraulic power via single control lever for each track.
Operator’s station
- Engine ECM diagnostic module provides all engine operating parameters. Keyed ignition switch, starter switch, headlight switch, emergency stop switch, steering controls with engine throttle switches, parking brake control, two speed track control, two speed front carrier winch control, and track drive pressure gauges.
ROPS protection
- A roll-over protective structure is standard on the CME-800X. It meets SAE specification J1040C and includes a front brush guard.
Fuel tank capacity
- 40 U.S. gallons (152 L)
Hydraulic tank capacity
- 80 U.S. gallons (303 L)
Hydraulic pump drives available
- Supplied with fixed displacement pump having max capacity of 25 gpm at 2000 psi (contact CME for additional options)
Front winch
- 20,000 pound (9,072 kg), two-speed hydraulic drive
Operational characteristics
- Zero turn capability
- Ground speeds (max):
- Low range: 2 mph (3.2 kph)
- High range: 5 mph (8 kph)
- Tractive effort (max):
- Low range: 53,275 pounds (24,165 kg)
- High range: 21,645 pounds (9,818 kg)
- Ground clearance: 13.5 inches (34 cm)
- Gradeability:
- 60% straight ahead
- 40% side hill
Payload rating
- 16,000 pounds (7,257 kg)
800X Features | 800X Specifications
Performance ratings are based on engineering specifications, calculations and accepted industry standards.
Capacities may vary according to drilling conditions. CME reserves the right to amend these specifications at any time, without notice.
