CME-55LCX Truck Mounted Drill Specifications
Rubber Tire ATV Mounted Drills | Truck Mounted Drills | Track Carrier Mounted Drills | Trailer Mounted Drills | Skid Mounted Drills
55LCX Features | 55LCX Specifications | 55LCX Optional Equipment
Engine
- Cummins QSF 3.8L (229 cubic inch) 130 horsepower (97 kilowatt) 4-cylinder turbocharged diesel engine with electronic throttle, engine protection shut down, and cold weather starting aid. U.S. EPA Tier-4 final emissions certified diesel engine.
Rotary drive
- Clutch, heavy duty 14 inch (35.6 cm)
- Transmission, mechanical 5 speed forward, 1 speed reverse
- Drill spindle torque
- 11,853 foot pounds (16,071 Nm)
- Drill spindle speed
- 642 rpm
- Hollow spindle
- Standard: 2-3/4 inch I.D. (7 cm)
- Optional: 3-3/4 inch I.D. (9.5 cm)
Hydraulic feed system
- Retract force
- 27,615 pounds (12,526 kg)
- Pulldown force
- 19,750 pounds (8,959 kg)
- Retract rate
- 45 feet (13.7 m) per minute
- Rapid Retract rate
- 95 feet (29 m) per minute
- Feed Rate
- 65 feet (19.8 m) per minute
- Stroke
- 72 inch (183 cm)
55LCX Features | 55LCX Specifications | 55LCX Optional Equipment
Performance ratings are based on engineering specifications, calculations and accepted industry standards.
Capacities may vary according to drilling conditions. CME reserves the right to amend these specifications at any time, without notice.
