Truck Mounted Drills

CME-45B Truck Mount Auger Drill

CME-45B

The CME-45B is an economical, efficient drill that can be mounted on a truck, trailer or ATV carrier. Power is provided by a deck mounted diesel engine. Available optional equipment includes in-out and sideways slide bases, automatic SPT hammer, direct push hammer, hydraulic rod holder and break-out wrench, cathead, water tank, a variety of hydraulic hoists, and much more.

The CME-45B will drill holes up to 11 inches [27 cm] in diameter using conventional or hollow-stem augers. Read more…

CME-550

CME-45C

This is one of our most versatile drill rigs. It can be mounted on a truck, trailer, skid, ATV or the CME-300 tracked carrier. It can even be helicopter-portable. A skid/trailer configuration is also available. This application gives you two options. You can use the drill as a conventional trailer mounted unit, or you can easily remove the drill from the trailer and skid it up or down steep slopes, or through narrow openings.

The CME-45C has the same drilling capabilities as the CME-45B but can also be equipped for angle drilling. Read more…

CME-55 Truck Mounted Auger Drill

CME-55

The CME-55 has been the standard of its class for over 40 years. It can be mounted on a truck, trailer, ATV, or the CME-300 tracked carrier. A low-clearance model is also available that allows you to drill under service station canopies or other overhead obstructions.

With 28,275 pounds [12,826 kg] of retract force and up to 9,400 foot pounds [12,784 Nm] of rotary torque, the CME-55 is capable of drilling holes up to 14.75 inches [32.5 cm] in diameter using conventional or hollow-stem augers. Fast retract is now standard. Read more…

CME-75 Truck Mounted Auger Drill

CME-75

The CME-75 has earned a reputation second to none for outstanding performance and reliability. It can be mounted on a single or tandem rear axle truck or ATV carrier. Fast retract rates mean quick cycle times when adding augers or tripping out of the hole.

The dependable mechanical rotary drive is available with up to 12,950 foot pounds [17,612 Nm] of torque for auger drilling holes up to 18.5 inches [47 cm] in diameter. Read more…

CME-85 Truck Mounted Auger Drill

CME-85

This rig has big power. And it was built to handle that power. There are no compromises. Everything is heavy-duty. The right angle drive, the rotary box, the frame, every component was specifically designed to take the forces this drill can produce, and then some.

Like all CME drills, the CME-85 is designed with many features for easy operation. A patented hydraulic kelly bar lift system, for instance, makes coupling and uncoupling the kelly bar to the right angle drive virtually effortless.

The transmission has six forward gears so there’s a rotation speed and torque combination for just about any situation, from large diameter auger drilling to deep rotary jobs. With 22,900 foot pounds [31,144 Nm] of torque, the CME-85 can handle hole sizes up to 18.5 inches [47 cm] in diameter using hollow-stem augers. Read more…

CME-95 Truck Mounted Auger Drill

CME-95

Equip the CME-95 with a string of CME extra-heavy-duty augers and you’ve got the ultimate combination for really big drilling jobs. No other drill is going to do the job for you faster or more efficiently. The rugged mechanical rotary drive is available with up to 36,100 foot pounds [49,096 Nm] of torque for turning large diameter augers.

The power shift transmission, with four gears in both forward and reverse, provides a rotation speed and torque combination for any situation. And an independent, hydraulically actuated low speed drive system gives you infinite regulation of spindle rotation from 0 to 100 rpm. It makes lining up auger connections and making or breaking drill rod connections easy. It also works exceptionally well in down-the-hole hammer drilling operations.

In auger drilling applications, the standard CME-95 can drill up to 18.5 inch [47 cm] diameter holes. It can also be equipped for drilling up to 25 inch [63.5 cm] diameter holes. Read more…

CME Truck Mounted Drills
  45B 45C 55 75 85 95
Standard Rotary Box
Rotational Speed (max) 643 rpm 643 rpm 800 rpm 740 rpm 530 rpm 544 rpm
Rotary Torque (max) 3,395 ft lbs[4,603 Nm] 3,395 ft lbs[4,603 Nm] 7,700 ft lbs[10,440 Nm] 10,230 ft lbs[13,870 Nm] 21,900 ft lbs[29,692 Nm] 30,200 ft lbs[40,945 Nm]
High Torque Rotary Box
Rotational Speed (max) 453 rpm 453 rpm 665 rpm 580 rpm   454 rpm
Rotary Torque (max) 4,815 ft lbs[6,528 Nm] 4,815 ft lbs[6,528 Nm] 9,400 ft lbs[12,744 Nm] 12,950 ft lbs[17,557 Nm]   36,100 ft lbs[48,945 Nm]
High Speed Rotary Box
Rotational Speed (max) 700 rpm 700 rpm   930 rpm 675 rpm  
Rotary Torque (max) 3,115 ft lbs[4,223 Nm] 3,115 ft lbs[4,223 Nm]   8,180 ft lbs[11,090 Nm] 18,000 ft lbs[24,404 Nm]  
Feed System
Pull Down Force 13,650 lbs[6,192 kg] 13,650 lbs[6,192 kg] 18,650 lbs[8,460 kg] 20,000 lbs[9,072 kg] 28,000 lbs[12,700 kg] 33,135 lbs[15,030 kg]
Retract Force 19,600 lbs[8,891 kg] 19,600 lbs[8,891 kg] 28,275 lbs[12,826 kg] 30,000 lbs[13,608 kg] 48,000 lbs[21,773 kg] 62,830 lbs[28,500 kg]