CME-45C Track Carrier Auger Drill Specifications

CME-45C mounted on 300 carrier tracking through mud

Features | Specifications | Optional Equipment

Engine

  • Deutz 197 cubic inch [3.2L] 57 Horsepower [42.5 kilowatt] air-cooled 3 cylinder diesel engine.

Carrier

  • Track Width
    • 12.6 in [32 cm]
    • Avg. ground bearing pressure
      • 5.4 psi [.379 kg/cm2]
  • Optional Track Width
    • 17.7 in [45 cm]
    • Avg. ground bearing pressure
      • 3.9 psi [.270 kg/cm2]
  • Suspension
    • Triple walking beams
  • Turning Radius
    • In place
  • Drive
    • Hydraulic motor/planetary wheel drives
  • Optional 2 Speed drive
    • Low Speed: 0-1mph
    • High Speed: 0-2mph
  • Steering
    • Remote radio controlled guidance
  • Hydraulic front winch
    • 12,000 lbs [5,443 kg]
  • Auger and rod racks
    • Standard
  • Tool boxes
    • Standard

Gradeability

  • Straight ahead climb
    • 46% grade
  • Side-hill traverse
    • 36% grade

Rotary drive

  • Standard
    • Rotary Torque
      • 3,395 foot pounds [4,603 Nm]
    • Rotary Speed
      • up to 643 rpm max
  • High torque
    • Rotary Torque
      • 4,815 foot pounds [6,528 Nm]
    • Rotary Speed
      • up to 453 rpm max
  • High speed
    • Rotary Torque
      • 3,115 foot pounds [4,223 Nm]
    • Rotary Speed
      • up to 700 rpm max
  • Clutch, heavy duty
    • 13 inch [33 cm]
  • Transmission
    • 4 speed forward, 1 speed reverse

Hydraulic feed system

  • Retract force
    • 19,600 pounds [8,891 kg]
  • Pulldown force
    • 13,650 pounds [6,192 kg]
  • Retract rate (max)
    • 55 feet [17 m] per minute
  • Feed Rate (max)
    • 79 feet [24 m] per minute
  • Stroke
    • 68 inch [173 cm]

Leveling system

Four hydraulic jacks, inverted design with chrome-plated piston rods enclosed at all times.

  • Stroke
    • 36 inch [91.4 cm]